Система на модуле STAMP-RK3506-CM
CPU: RockChip RK3506B,Triple ARM® Cortex™-A7 core ARM® Cortex™-M0 RK3506 main frequency up to 1.5GHz
RAM: 256MB DDR3L
Flash: 8GB eMMC
Ethernet: 2-ch network chipset adopts MII mode to support 10M/100M Ethernet
UART: 1-ch RS232 serial port (Wi-Fi multiplexed five-wire serial port) 2-ch RS485
















параметры | |||
---|---|---|---|
CPU | RockChip RK3506B,Triple ARM® Cortex™-A7 core ARM® Cortex™-M0 RK3506 main frequency up to 1.5GHz | RAM | 256MB DDR3L |
Flash | 8GB eMMC | Ethernet | 2-ch network chipset adopts MII mode to support 10M/100M Ethernet |
UART | 1-ch RS232 serial port (Wi-Fi multiplexed five-wire serial port) 2-ch RS485 | CAN | 2-ch CANFD |
USB | 3-ch USB2.0 HOST, 2-ch Type-A, 1 PHB2.0 port 1-ch USB Type-c (Debug) | Display Interface | 1-ch 2-lane MIPI_DSI display interface, resolution up to 1280x1280@60 |
Audio | Stereo amplifier output,1-ch MIC audio input | Extension Interface | MINI-PCIE (USB2.0), external 4G module, SIM card interface |
Storage interface | 1-ch TF card slo | Power Supply | 9V - 30V, default DC_12V |
Operating System | supportLinux6.1system,Buildroot | Power Consumption | The power consumption of the whole board is 5W (loaded) |
Operating Temperature | 0℃ - +70℃ | Working Humidity | 5% - 95%, non-condensation |
Storage Humidity | -10℃ - +80℃ | Other Interfaces | GPIO * 10 (3.3V, 4 of which are shared with Wi-Fi) |
Other Features | Reset circuit, watchdog circuit, real-time clock | Wi-Fi | Onboard AP6256 Wi-Fi module, supports 2.4GHz/5GHz 802.11 a/b/g/n protocols |
характеристики | |||
---|---|---|---|
J2 | Debug serial port (USB TO SERIAL) | J3 | Type-C interface |
J4 | Double-layer USB2.0 Type-A HOST | J5 | USB2.0 PHB HOST |
J6 | 100M Ethernet interface | J7 | 100M Ethernet interface |
J9 | MIMI-PCIE (USB2.0) | J10 | MIPI-DSI (2-lane) Display Interface |
J11 | MIC input | J12 | Speaker output |
J13 | RS232 (three-wire, multiplexed with RS485) | J14 | RS485 |
J15 | RS232 (three-wire) | J16 | RS232 (five-wire, multiplexed with WLAN) |
J17 | GPIO (3.3V) | J18 | CAN |
J19 | CAN | J20 | TF card slot |
S1 | SIM card slot | BT1 | RTC battery |
SW1 | Reset button | SW2 | Maskrom button |
SW3 | Recoverybutton | J21 | DC12V power input |